Battery Replacement 3M Denibbing Tool OPM: 8500-11500 Made in USA by innoVolta

Applications:

  • Replacement Battery for
    3M Denibbing Tool OPM: 8500-11500

Meet Highly Safe Auto Industrial Requirements:

  • Selected Power Tool Grade, LOW-HEAT, NMC HIGH DRAIN Cells
  • In-Cell Construction by Thermal Runaway Safer Material up to 210 Degree C
  • Individual Cell Carries UL 1642 and RoHS Certificates
  • Build-in Reinforced Insulation between Cells
  • Build-in Industrial Grade PCM (Protections: Short Circuit, Over-Charge, Over-Discharge)
  • Never worry about an explosion owing to an accidental short circuit or a human mishandling

High Performance:

  • 7.4 V 2,000 mAh (133% Run Time)
  • Short Circuit Protection Current (up to 16 A)

Ultra Long Life:

  • Real-Time Tested Cycle Life (individual cells): Over 2,000 Deep Cycles
  • Excellent Cell Matching ACIR @1 kHz < 2 mOhm/bin
  • Excellent Cell Matching Capacity < 20 mAh/bin

Convenience:

  • 2.5″ long flexible wires rated UL 1007, 22AWG, 80 degC, 300V, VW-1
  • Wiring Polarity: Red (+), Black (-)

Description

This is the custom battery pack dedicated to replace the aged original battery for 3M Denibbing Tool OPM: 8500-11500.
 
Note: The original battery is rated as 7.2 V 1,500 mAh
 
*** Please contact us if you own a different Denibbing Tool and can’t find a compatible battery for replacement! ***

To know about innoVolta’s product capability, please visit 

https://www.innovolta.com/about-us/


Specifications

  • Brand: innoVolta USA
  • Upgrade Model: IVC361866-2S20FPIX (133% Run Time)
  • Capacity: 2,000 mAh (Upgrade)
  • Energy: 14.8 Wh
  • Nominal Voltage: 7.4 V
  • Charge Current: 1.0 A
  • Short Circuit Protection Current: up to 16 A
  • Battery Pack Size (maximum): 37.0 mm Wide * 19.5 mm High * 66.5 mm Long
  • Weight: 91.6 g (average)
  • Connector: Flying Leads
  • Wire: Red/Black, 2.5″ long, UL 1007,  22AWG, 80 degC, 300V, VW-1

 

Additional information

Weight 0.25 lbs